Help identifying a font

This forum is for general discussion regarding VCarve Pro
ezurick

Re: Help identifying a font

Post by ezurick »

Adrian wrote:
ezurick wrote: personally, I would not pay for any font since there are tons out there for free.
Depends on what you're using them for. Very few of the free fonts allow for commercial usage.

True.. sorry, I am not commercial.

Rjlatino0706
Posts: 5
Joined: Fri Mar 29, 2019 1:14 pm
Model of CNC Machine: Oliver intellicarve 1013..x-carve machin

Re: Help identifying a font

Post by Rjlatino0706 »

was wondering if you know how to add more fonts into V-Carve pro,I need to get the HARRY POTTER FONT,so how would i add that font to my fonts Library?will very much appreciate it..

User avatar
gkas
Vectric Wizard
Posts: 1450
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: Help identifying a font

Post by gkas »


jim fagundo
Posts: 10
Joined: Mon Jun 15, 2020 10:30 pm
Model of CNC Machine: Shopsabre 23

Re: Help identifying a font

Post by jim fagundo »

I am also trying to figure out how to add fonts to vectra. I tried to watch the video on the response, I could not view it??? any help would be appreciated.
Jim

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Help identifying a font

Post by highpockets »

You don't add fonts to VCP you add True Type Fonts to Windows. Download a TTF double click on the file and click on the "install" button. Of course if the TTF is in a zip file you must unzip the files first :D
John
Maker of Chips

jim fagundo
Posts: 10
Joined: Mon Jun 15, 2020 10:30 pm
Model of CNC Machine: Shopsabre 23

Re: Help identifying a font

Post by jim fagundo »

Thank you sir !! It worked.

Post Reply