Help with molding toolpath

This forum is for general discussion regarding VCarve Pro

Help with molding toolpath

Postby hmatyas » Wed Nov 07, 2018 10:59 pm

Hi

I have been trying to make a piece of molding for a table.
The problem is not with the profile.
The problem is that I get about a 1/4 inch piece at the end of the piece.
I have tried everything, I then checked the simulation and it is also on the simulation.

I have attached the file, it is called TableProfile12.crv

Any help would be greatly appreciated as I'm trying to make the profile for a friend's son and

he would like it done before Thanksgiving.

Thank you.

Harvey
Attachments
TableProfile12.crv
This is the file
(510.5 KiB) Downloaded 15 times
hmatyas
Vectric Apprentice
 
Posts: 5
Joined: Sun Sep 06, 2015 2:49 am
Model of CNC Machine: Stepcraft

Re: Help with molding toolpath

Postby highpockets » Wed Nov 07, 2018 11:18 pm

Us a Boundary Offset just a little larger than half the diameter of the finish ball nose. I used .13"
Image 264.png
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1821
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Help with molding toolpath

Postby hmatyas » Thu Nov 08, 2018 12:56 am

Thank you, thank you and thank you.

It worked just like you said it would.

I spent all day making test cuts and I could not figure it out.

Harvey

:D :D
hmatyas
Vectric Apprentice
 
Posts: 5
Joined: Sun Sep 06, 2015 2:49 am
Model of CNC Machine: Stepcraft


Return to VCarve - General

Who is online

Users browsing this forum: dgreen2 and 37 guests