Preview wood types

This forum is for general discussion regarding VCarve Pro

Preview wood types

Postby Mikehell » Tue Sep 25, 2018 5:30 pm

Some of the wood textures have vertical grain. So I decided to make both horizontal and vertical versions of each.

While I was at it, I downloaded a whole bunch of other wood types and added those in as well (both horizontal and vertical)

Once I finish this and clean it up would anyone like a copy?
Mikehell
Vectric Apprentice
 
Posts: 75
Joined: Wed Mar 22, 2017 9:34 pm
Model of CNC Machine: eBay special China 3040

Re: Preview wood types

Postby dah79 » Wed Sep 26, 2018 1:26 pm

Yes. thanks
Dave
dah79
Vectric Wizard
 
Posts: 307
Joined: Thu May 14, 2015 12:23 am
Location: Bemidji, MN
Model of CNC Machine: FLA Saturn 4x4

Re: Preview wood types

Postby sylvan356 » Wed Sep 26, 2018 1:29 pm

I would love it! Thanks!
User avatar
sylvan356
Vectric Craftsman
 
Posts: 128
Joined: Thu Dec 12, 2013 5:28 pm
Location: Ormond Beach, Florida
Model of CNC Machine: CAMaster Stinger 1 w/Rotary, Aspire 9

Re: Preview wood types

Postby Leo » Wed Sep 26, 2018 1:57 pm

yes I would love that.
Imagine the Possibilities of a Creative mind

www.leosworkshop.com
User avatar
Leo
Vectric Wizard
 
Posts: 2705
Joined: Sat Jul 14, 2007 3:02 am
Location: East Freetown, Ma.
Model of CNC Machine: 1300 x 1300 x 254

Re: Preview wood types

Postby Jim_Nestor » Wed Sep 26, 2018 2:57 pm

Yes! Thanks for sharing
Jim_Nestor
 
Posts: 49
Joined: Wed Jun 17, 2009 2:18 pm

Re: Preview wood types

Postby bk3132 » Wed Sep 26, 2018 3:37 pm

Most definitely! One of VCarve Pro's annoyances is that grain runs along Y in preview, and pretty much everything I do is designed with grain running along X. Makes me nuts! Thank you.
bk3132
Vectric Apprentice
 
Posts: 27
Joined: Fri Sep 29, 2017 5:19 pm
Model of CNC Machine: shopbot PRSStandard 48-96

Re: Preview wood types

Postby Bob Reda » Wed Sep 26, 2018 3:38 pm

Add me to the list also, thanks a bunch!

Bob
Bob Reda
Vectric Wizard
 
Posts: 675
Joined: Wed Aug 16, 2006 7:34 pm
Location: Monessen, Pa
Model of CNC Machine: shopbot 48x48 upgraded prt

Re: Preview wood types

Postby highpockets » Wed Sep 26, 2018 3:40 pm

Yes Please!!!
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1821
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Preview wood types

Postby rgerding » Wed Sep 26, 2018 7:22 pm

Count me in. I would also like a copy.
User avatar
rgerding
 
Posts: 37
Joined: Mon Nov 28, 2016 7:29 pm
Model of CNC Machine: Iconic 2015

Re: Preview wood types

Postby GEdward » Wed Sep 26, 2018 8:21 pm

You bet! I did some of that my self but even though the new name, "dark cherry vertical" for instance, shows up on the menu, the image refused to rotate. :?:
GEdward
Vectric Apprentice
 
Posts: 43
Joined: Wed Jul 05, 2017 9:13 pm
Location: Ipswich, South Dakota
Model of CNC Machine: Romaxx WD-1

Re: Preview wood types

Postby Savannahdan » Wed Sep 26, 2018 10:05 pm

I'd appreciate a copy. Thank you.
Savannahdan
Vectric Craftsman
 
Posts: 168
Joined: Sun May 03, 2015 12:25 pm
Location: Savannah, GA
Model of CNC Machine: Axiom AR8

Re: Preview wood types

Postby scottp55 » Thu Sep 27, 2018 10:23 am

Add 1 more please. :)
THANKS!
scott
User avatar
scottp55
Vectric Wizard
 
Posts: 2351
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: Shopbot Desktop 5.5"Z/spindle/VCP9

Re: Preview wood types

Postby Robert L » Thu Sep 27, 2018 3:50 pm

I would like to be included,

Robert
Robert L
Vectric Apprentice
 
Posts: 73
Joined: Sun Dec 21, 2014 7:32 pm
Model of CNC Machine: Multicam

Re: Preview wood types

Postby SteveNelson46 » Thu Sep 27, 2018 4:30 pm

It's really not rocket science. The pics are in "C:\ProgramData\Vectric\Aspire\V9.5\BitmapTextures\1_Wood". Just use any good paint program, I used Corel Paint, rotate the image 90 degrees and save as a different name. I just added a "VG" for vertical grain and "HG" for horizontal grain to the end of the filename. If you want to keep the custom changes separate, put them in the folder "C:\Users\Public\Documents\Vectric Files\Material Images" and they will appear at the top of the list in Aspire/V-Carve.
Steve
User avatar
SteveNelson46
Vectric Craftsman
 
Posts: 267
Joined: Wed Jan 04, 2012 2:43 pm
Location: Tucson, Az.
Model of CNC Machine: Carvewright

Re: Preview wood types

Postby DanB. » Fri Sep 28, 2018 1:48 am

Please include me.
Thanks
DanB.
 
Posts: 43
Joined: Thu Feb 15, 2007 7:13 pm
Location: Sparks, Nevada
Model of CNC Machine: Homebuilt 24" x 48"

Next

Return to VCarve - General

Who is online

Users browsing this forum: No registered users and 25 guests