VCP 9.508 update problem
-
- Posts: 45
- Joined: Thu Feb 15, 2007 7:13 pm
- Model of CNC Machine: Homebuilt 24" x 48"
- Location: Sparks, Nevada
VCP 9.508 update problem
Version 9.508 Available! appears in the upper right hand screen, I click on it and it takes me to the download and downloads the file but when it is installing it this message comes on screen.
I have tried this several times with the same result, help please.- IslaWW
- Vectric Wizard
- Posts: 1402
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: VCP 9.508 update problem
Any chance that VCPro is still running, but minimized?
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
-
- Posts: 45
- Joined: Thu Feb 15, 2007 7:13 pm
- Model of CNC Machine: Homebuilt 24" x 48"
- Location: Sparks, Nevada
Re: VCP 9.508 update problem
VCarve was turned off.
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: VCP 9.508 update problem
What version are you currently running, before the update?
Gerry - http://www.thecncwoodworker.com
-
- Vectric Wizard
- Posts: 1715
- Joined: Sun Sep 23, 2012 12:14 pm
- Model of CNC Machine: CNC Shark Pro, Probotix Meteor 25" x 50"
Re: VCP 9.508 update problem
I had the same problem trying to update Aspire. Use CTRL-ALT-Delete then click on task manager to verify that VCarve isn't still a running process. If you see it in the list then select it and click on "end task". If that doesn't help, and you are running a antivirus program try turning that off and trying the update again.
4D
4D
-
- Posts: 45
- Joined: Thu Feb 15, 2007 7:13 pm
- Model of CNC Machine: Homebuilt 24" x 48"
- Location: Sparks, Nevada
Re: VCP 9.508 update problem
I am presently running version 9.507