VCP 9.508

This forum is for general discussion regarding VCarve Pro
Post Reply
naijin
Vectric Craftsman
Posts: 114
Joined: Wed Dec 18, 2013 10:25 am
Model of CNC Machine: home made

VCP 9.508

Post by naijin »

Hi there, how or where do I copy the patch to update from 9.507 to 9.508?, the computer is not connected to the inter net in the workshop.

Nick

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: VCP 9.508

Post by Adrian »

The updates can be downloaded individually from here but it usually takes a few days to catch up with the automatic release - https://www.vectric.com/support/program-updates.html - once downloaded you can copy the file via a memory card/ thumb drive to the workshop PC.

Each update that is downloaded via the update mechanism stays in the VCarve Program Files folder as well so you can copy the update file from there also.

mohamed
Vectric Staff
Posts: 523
Joined: Wed Jul 19, 2017 11:59 am
Model of CNC Machine: Craft CNC DS1

Re: VCP 9.508

Post by mohamed »

The webpage hasn't been updated yet it seems. In this case, just use this link to download the executable directly http://www.vectric.eu/patches/VCarvePro ... _v9508.exe

Copy that to the installation folder of VCP 9.5 in Program Files and run it. Otherwise, you could download the full installer from the portal which will be 9.508
--------------
Mohamed
++++++++

Post Reply