I was text chatting with my brother while editing a vector image, and managed to accidentally hotkey something which makes the toolpaths show up as a fill instead of lines.
I love it! Very helpful, but would still like to know what I pressed to do that
Thanks in advance.
Question: Toolpath Fill
-
- Vectric Wizard
- Posts: 413
- Joined: Wed Jul 09, 2014 1:19 am
- Model of CNC Machine: CRP Pro 4848 Custom Build
- Location: Drumheller, Alberta, Canada
- Contact:
Question: Toolpath Fill
Connor Bredin
Distinctive Dimensional Concepts Ltd.
www.distinctive-concepts.ca
Distinctive Dimensional Concepts Ltd.
www.distinctive-concepts.ca
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Question: Toolpath Fill
Don't know what the short key is, but you toggled toolpath 2D drawing style to solid.
John
Maker of Chips
Maker of Chips
-
- Vectric Wizard
- Posts: 413
- Joined: Wed Jul 09, 2014 1:19 am
- Model of CNC Machine: CRP Pro 4848 Custom Build
- Location: Drumheller, Alberta, Canada
- Contact:
Re: Question: Toolpath Fill
Thanks! I don't have that button anywhere on 8.5, but it did give me an idea of what to look for. Found a checkbox at the bottom corner of the tool-paths tab that toggles it. Thanks for your help.
Connor Bredin
Distinctive Dimensional Concepts Ltd.
www.distinctive-concepts.ca
Distinctive Dimensional Concepts Ltd.
www.distinctive-concepts.ca
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Question: Toolpath Fill
Sorry, on 8.5 it's at the bottom of the Preview Toolpath on the toolpath tab.
John
Maker of Chips
Maker of Chips