Anyone have bar top arcade cabinet plans
-
- Vectric Craftsman
- Posts: 122
- Joined: Sat Jan 05, 2013 8:16 pm
- Model of CNC Machine: Homegrown
- Location: Central Minnesota
Anyone have bar top arcade cabinet plans
Just wondering if anyone has some plans they would be willing to share? Looking to make nice wood one, not a mdf with graphics.
Re: Anyone have bar top arcade cabinet plans
Not Vectric/CNC but The Wood Whisperer provided plans which were great - I built one with my kids:
https://www.thewoodwhisperer.com/videos ... pberry-pi/
I would be interested in CNC files for this as it would be much faster - at the time I didn’t have a CNC.
https://www.thewoodwhisperer.com/videos ... pberry-pi/
I would be interested in CNC files for this as it would be much faster - at the time I didn’t have a CNC.
- sharkcutup
- Vectric Wizard
- Posts: 2885
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: Anyone have bar top arcade cabinet plans
With time permitted the wood whisperer plans can be drawn in V-Carve in under two hours.
Approx. Total cost to build - $400.
Sharkcutup
Approx. Total cost to build - $400.
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
YouTube Channel - Sharkcutup CNC
V-Carve Pro 11.554
Re: Anyone have bar top arcade cabinet plans
I don't know if there are any barcade plans on the site below, but they have a lot of full sized ones that have been reproduced, free, and have vcarve downloads...
https://www.classicarcadecabinets.com
BTW, the vcarves do not contain the tool paths for most, you'll still need to add those.
https://www.classicarcadecabinets.com
BTW, the vcarves do not contain the tool paths for most, you'll still need to add those.
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA