Wandering tool
-
- Vectric Craftsman
- Posts: 235
- Joined: Sat Feb 23, 2013 11:47 pm
- Model of CNC Machine: home built
Wandering tool
When I set up a cut ,pattern, my tool will wander about six inches off the project, then return and start cutting the pattern. Can’t seem to figure it out. Dan , Stumped in Maine
Re: Wandering tool
You probably have a wandering vector somewhere, or a small component too small to see, that's off to the side. A good way to tell is select the entire work surface and hit the "zoom active view" If you component view is off center you'll know there's something else there.
Gary
Gary
-
- Vectric Craftsman
- Posts: 235
- Joined: Sat Feb 23, 2013 11:47 pm
- Model of CNC Machine: home built
Re: Wandering tool
I don’t think it is a wondering vector because it didn’t cut anything out there. This computer is a desktop dedicated to doing the artwork. I replicated the small job on my laptop with no issues. I’m sure it is some little thing I am missing. I’m not real adept at this computer science so I can be something silly. Dan
- Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Wandering tool
Do you have offsets on your job setup where X-Y zero is setup?
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Craftsman
- Posts: 235
- Joined: Sat Feb 23, 2013 11:47 pm
- Model of CNC Machine: home built
Re: Wandering tool
Leo....I think you hit the problem. Ma and I were working on this project kinda together. Funeral urn box. And I’ll bet that box got inadvertently checked with default numbers in it. We’re not real swift when it comes to computer related stuff. Late 70 issues you know. Ma is the kind that just keeps mashing buttons until she gets the results she wants and I’m scared to mash buttons
When dose one use that feature?
Thanks....Dan , Dragonlady
When dose one use that feature?
Thanks....Dan , Dragonlady
-
- Vectric Craftsman
- Posts: 235
- Joined: Sat Feb 23, 2013 11:47 pm
- Model of CNC Machine: home built
Re: Wandering tool
Looked in tutorial information and can’t find info on offsets.