help with 1" grid lay out

This forum is for general discussion regarding VCarve Pro
Post Reply
JTEagle
Posts: 23
Joined: Mon Nov 27, 2017 12:41 am
Model of CNC Machine: Axiom Autoroute Pro 8

help with 1" grid lay out

Post by JTEagle »

I'm using vcarve pro9 and trying to layout a 1" grid on spoilboard. I'm a newbie to all of this cnc stuff

User avatar
adze_cnc
Vectric Wizard
Posts: 4325
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: help with 1" grid lay out

Post by adze_cnc »

I could tell you how to lay out the grid. I could even post .CRV with the work done for you but you'd not learn much from it.

All there is to know can be found in:

0. Introduction CNC -- http://www.vectric.com/support/introduction-to-cnc.html

1a. the online tutorials -- http://support.vectric.com/training-material
1b. in particular "Introduction to Drawing Vectors" -- Image

2. the online help file -- https://docs.vectric.com/docs/V9.0/VCar ... /Home.html

Good luck.

JTEagle
Posts: 23
Joined: Mon Nov 27, 2017 12:41 am
Model of CNC Machine: Axiom Autoroute Pro 8

Re: help with 1" grid lay out

Post by JTEagle »

Thank you very much Adze that was very helpful info. I have had this machine since last November and just getting to play with it. Had a lot of health problems that keep me from it.

Again a big thank you
John

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: help with 1" grid lay out

Post by highpockets »

adze_cnc is correct, teach a man to fish....

Here's a tutorial on the array copy tool.

http://support.vectric.com/tutorials/V9 ... ideo_id=39
John
Maker of Chips

Post Reply