help with 1" grid lay out
help with 1" grid lay out
I'm using vcarve pro9 and trying to layout a 1" grid on spoilboard. I'm a newbie to all of this cnc stuff
- adze_cnc
- Vectric Wizard
- Posts: 4380
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: help with 1" grid lay out
I could tell you how to lay out the grid. I could even post .CRV with the work done for you but you'd not learn much from it.
All there is to know can be found in:
0. Introduction CNC -- http://www.vectric.com/support/introduction-to-cnc.html
1a. the online tutorials -- http://support.vectric.com/training-material
1b. in particular "Introduction to Drawing Vectors" --
2. the online help file -- https://docs.vectric.com/docs/V9.0/VCar ... /Home.html
Good luck.
All there is to know can be found in:
0. Introduction CNC -- http://www.vectric.com/support/introduction-to-cnc.html
1a. the online tutorials -- http://support.vectric.com/training-material
1b. in particular "Introduction to Drawing Vectors" --
2. the online help file -- https://docs.vectric.com/docs/V9.0/VCar ... /Home.html
Good luck.
Re: help with 1" grid lay out
Thank you very much Adze that was very helpful info. I have had this machine since last November and just getting to play with it. Had a lot of health problems that keep me from it.
Again a big thank you
John
Again a big thank you
John
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: help with 1" grid lay out
adze_cnc is correct, teach a man to fish....
Here's a tutorial on the array copy tool.
http://support.vectric.com/tutorials/V9 ... ideo_id=39
Here's a tutorial on the array copy tool.
http://support.vectric.com/tutorials/V9 ... ideo_id=39
John
Maker of Chips
Maker of Chips