Has anyone designed a suitable box to contain ashes please?
If yes, are you able to share the VCarve files please?
Thank you
Ashes box
-
- Vectric Apprentice
- Posts: 52
- Joined: Wed May 10, 2017 5:11 pm
- Model of CNC Machine: ELU860
- martin54
- Vectric Archimage
- Posts: 7352
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Ashes box
There have been a few posted in the gallery, not sure if aspire or vcarve, one that springs to mind was the paradise box one done by CarveOne
Try a search on the forum under urn or urns
Don't know if any of them would share the files but the paradise box is a free project
Try a search on the forum under urn or urns
Don't know if any of them would share the files but the paradise box is a free project
-
- Vectric Apprentice
- Posts: 63
- Joined: Mon Sep 19, 2016 8:45 am
- Model of CNC Machine: bravoprodigy be3030
Re: Ashes box
alan
one I made page 2 in vcarve forum paradise box urn
one in aspire forum paradise box urn by carveone page 7
using Michael Tyler,s free project paradise box
hope this helps
one I made page 2 in vcarve forum paradise box urn
one in aspire forum paradise box urn by carveone page 7
using Michael Tyler,s free project paradise box
hope this helps
-
- Vectric Apprentice
- Posts: 52
- Joined: Wed May 10, 2017 5:11 pm
- Model of CNC Machine: ELU860
Re: Ashes box
Thank you Martin and Frank for your replies.
Yes, I did wonder whether I was explicit in my description. In my eyes, an urn was a cylindrical container, which is not what we want. Hence I used the term box.
I will follow up on your suggestions.
Yes, I did wonder whether I was explicit in my description. In my eyes, an urn was a cylindrical container, which is not what we want. Hence I used the term box.
I will follow up on your suggestions.
- martin54
- Vectric Archimage
- Posts: 7352
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Ashes box
I have to be honest I normally think of an Urn as a sort of cylindrical or vase shape but could remember the paradise box ones in the galleryAlanAndrews wrote:Thank you Martin and Frank for your replies.
Yes, I did wonder whether I was explicit in my description. In my eyes, an urn was a cylindrical container, which is not what we want. Hence I used the term box.
I will follow up on your suggestions.
Just tried a google search for square urn & there looks like there could be some ideas for you if you try that, still wouldn't give you the files but there are a few boxes in the free vectric projects that could be used as a starting point, just need to add a suitable design
Lost count of how many paradise boxes I have made, not as many as some on here but a few & I have never made one with the original design supplied by Michael Tyler