Navy Seal

This forum is for general discussion regarding VCarve Pro

Navy Seal

Postby Ken Tipton » Wed May 16, 2018 5:56 pm

Can anyone direct me where I can get a Navy Seal (Paid or free) I would like to cut it out 3d with the outside words United States Navy v carved. So I would like the outside rope border and the middle insignia to be 3d carved and the lettering to be v-carved.

Thank You
Ken
Ken Tipton
 
Posts: 42
Joined: Mon Feb 06, 2017 7:07 pm
Location: Ladera Ranch CA
Model of CNC Machine: Laguna IQ

Re: Navy Seal

Postby adze_cnc » Wed May 16, 2018 10:04 pm

Would the Navy Seal like to be cut? He or she might not complain---training and all that---but I expect they wouldn't be half pleased... :D
User avatar
adze_cnc
Vectric Apprentice
 
Posts: 405
Joined: Sat Jul 27, 2013 10:08 pm
Location: Vancouver, BC, Canada
Model of CNC Machine: AXYZ 4008

Re: Navy Seal

Postby martin54 » Wed May 16, 2018 10:18 pm

Have you tried a search on the forum Ken, sure there have been a few posts about Military plaques & crests some with links to where they can be found, not sure if what you are looking for has been mentioned though :lol: :lol:
User avatar
martin54
Vectric Wizard
 
Posts: 3810
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)

Re: Navy Seal

Postby Pete Cyr » Wed May 16, 2018 10:59 pm

Pete Cyr
Vectric Craftsman
 
Posts: 164
Joined: Sun May 15, 2011 4:19 pm
Model of CNC Machine: Camaster Stinger II

Re: Navy Seal

Postby Ken Tipton » Thu May 17, 2018 8:02 pm

I saw the one and Design and Make but that is not the Seal I am looking for. I will have to keep looking
Ken Tipton
 
Posts: 42
Joined: Mon Feb 06, 2017 7:07 pm
Location: Ladera Ranch CA
Model of CNC Machine: Laguna IQ

Re: Navy Seal

Postby Pete Cyr » Thu May 17, 2018 11:17 pm

Do you have a picture of the one you are looking for?
Pete Cyr
Vectric Craftsman
 
Posts: 164
Joined: Sun May 15, 2011 4:19 pm
Model of CNC Machine: Camaster Stinger II

Re: Navy Seal

Postby Trock » Fri May 18, 2018 2:33 am

Trock
 

Re: Navy Seal

Postby Trock » Fri May 18, 2018 2:51 am

Trock
 

Re: Navy Seal

Postby Bill_L » Fri May 18, 2018 12:46 pm

Here are the vectors for everything that you will need outside of the 3D relief. That you will have to buy from the Design and Make site.

Bill
Attachments
Navy Seal Vectors.eps
(152.46 KiB) Downloaded 94 times
Bill_L
Vectric Apprentice
 
Posts: 70
Joined: Tue Jan 24, 2006 11:57 am
Location: Imperial, PA USA

Re: Navy Seal

Postby Stephen50 » Fri May 18, 2018 3:16 pm

Another potential source cncmilitaryemblems.com. If you can't find what your looking for send an email they could design one for you. I did that for a few USAF units I was looking for the end product looked great.
Stephen50
Vectric Apprentice
 
Posts: 53
Joined: Sun Jul 28, 2013 9:09 pm
Model of CNC Machine: Shopbot Desktop

Re: Navy Seal

Postby Ken Tipton » Fri May 18, 2018 5:16 pm

this is the logo i am looking for

https://www.alsarmynavy.com/prodimages/ ... l.jpg?vm=r

didn't see this one on Design and Make

Ken
Ken Tipton
 
Posts: 42
Joined: Mon Feb 06, 2017 7:07 pm
Location: Ladera Ranch CA
Model of CNC Machine: Laguna IQ

Re: Navy Seal

Postby adze_cnc » Fri May 18, 2018 7:55 pm

I looked at those files available on Deisgn & Make and they all sort of look like the US Navy emblem but not quite. I expect the reason is a matter of licensing: http://www.navy.mil/trademarks/licensing.html
User avatar
adze_cnc
Vectric Apprentice
 
Posts: 405
Joined: Sat Jul 27, 2013 10:08 pm
Location: Vancouver, BC, Canada
Model of CNC Machine: AXYZ 4008

Re: Navy Seal

Postby Bill_L » Fri May 18, 2018 11:18 pm

Well, while I was in the Navy this is what it was.

https://commons.wikimedia.org/wiki/File ... e_Navy.svg
Attachments
600px-Seal_of_the_United_States_Department_of_the_Navy.svg.png
Bill_L
Vectric Apprentice
 
Posts: 70
Joined: Tue Jan 24, 2006 11:57 am
Location: Imperial, PA USA

Re: Navy Seal

Postby dhellew2 » Tue May 22, 2018 11:18 pm

You could use the design and make file then add your own text
;us navy 3d.jpg

This is the patch I use on my hats
US NAVY VETERAN.jpg

Dale
You will get old if you live long enough!

Dale
User avatar
dhellew2
Vectric Wizard
 
Posts: 1158
Joined: Thu May 22, 2008 10:14 pm
Location: Royal City Washington
Model of CNC Machine: Legacy Artisan 72

Re: Navy Seal

Postby Pete Cyr » Tue May 22, 2018 11:42 pm

Pete Cyr
Vectric Craftsman
 
Posts: 164
Joined: Sun May 15, 2011 4:19 pm
Model of CNC Machine: Camaster Stinger II

Next

Return to VCarve - General

Who is online

Users browsing this forum: No registered users and 17 guests