Nick
Post Processor
-
naijin
- Vectric Craftsman
- Posts: 114
- Joined: Wed Dec 18, 2013 10:25 am
- Model of CNC Machine: home made
Post Processor
Hi there, I used to use the MACH2/3 Arcs(mm)(.txt) when I was using Mac3, but I am now using UCCNC software, so which post processor do I save my tool paths now? I have a home made router no brand names etc.
Nick
Nick
-
IslaWW
- Vectric Wizard
- Posts: 1402
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: Post Processor
Nick...
You can use the same one
You can use the same one
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
-
Makingtoothpicks
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 23, 2013 8:46 pm
- Model of CNC Machine: Cncrouterparts CPR2448
- Location: Burien, Wa
- Contact:
Re: Post Processor
I use UCCNC also and I use the Mach3 inch atc PP. It works just fine.
Don
Don
-
naijin
- Vectric Craftsman
- Posts: 114
- Joined: Wed Dec 18, 2013 10:25 am
- Model of CNC Machine: home made
Re: Post Processor
Thanks for the replies, will still use Mach2/3 pp than.
Nick
Nick
-
martin54
- Vectric Archimage
- Posts: 7349
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Post Processor
There is also a pp for UCCNC listed if you have a look in the pp list 