sign making help!!

This forum is for general discussion regarding VCarve Pro
Post Reply
bk3132
Posts: 29
Joined: Fri Sep 29, 2017 5:19 pm
Model of CNC Machine: shopbot PRSStandard 48-96

sign making help!!

Post by bk3132 »

Hi everyone,

I am still relatively new to VCarve Pro. As you can see in this image, I can't get the toolpathing correct for this project.
sign help.jpg
I am trying to pocket out to .25" depth, leaving the text at original zero. Then the graphic should be .15" above the pocket depth and .1" below the text. Everything works except for the first O and second W. I have tried everything I can think of. Ideas?

Here's a link to the crv file. https://www.dropbox.com/s/va4vttn1yhtkf ... 4.crv?dl=0

Thanks!!
Brian

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: sign making help!!

Post by highpockets »

Check out Vectric tutorial on stacked text.
John
Maker of Chips

bk3132
Posts: 29
Joined: Fri Sep 29, 2017 5:19 pm
Model of CNC Machine: shopbot PRSStandard 48-96

Re: sign making help!!

Post by bk3132 »

Awesome. Thanks. That tutorial looks like exactly what I need.

bk3132
Posts: 29
Joined: Fri Sep 29, 2017 5:19 pm
Model of CNC Machine: shopbot PRSStandard 48-96

Re: sign making help!!

Post by bk3132 »

Worked like a charm. I’m all set now. Love those tutorials.

Post Reply