Here is the reply :
I have been looking into this with development and this appears to be a rare case where there is a visual issue in the toolpath preview.
We are looking into the possible cause of this issue, as this is the first time something like this has been seen.
In our tests we have seen that slowing the toolpath preview to 50% seems to make this preview more accurate.
This should not normally make a difference in the preview though so we are looking into this.
You can be rest assured though that the toolpath you have here should not cut this line in your final piece.
Many thanks for this report.
Best Regards
Charlotte
Reply from Vectric about moulding problem
- Makingtoothpicks
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 23, 2013 8:46 pm
- Model of CNC Machine: Cncrouterparts CPR2448
- Location: Burien, Wa
- Contact: