Good morning all,
Perhaps I am way behind but I saw a snowman bowl that was supposedly listed on the November 2017 project of the month. Since updating to Vcarve 9, I am not seeinf the news or projects. My project of the month shows up to October 2017. Am I missing something?
Thank you for your time.
CSMg
November 2017 Project of the Month
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: November 2017 Project of the Month
You're not missing anything. It's not been posted in the "normal" spots yet (Downloads and Cool Stuff). And neither has the November 2017 newsletter.
I sent an alert email to Vectric a few days ago. I'm sure they will get everything posted this week.
In the meantime, the project link does appear in the emailed version of the Newsletter. So if you are subscribed to that, then you should have been emailed a copy. The link to the project is "strange" (super long), but it seems to work ok.
I sent an alert email to Vectric a few days ago. I'm sure they will get everything posted this week.
In the meantime, the project link does appear in the emailed version of the Newsletter. So if you are subscribed to that, then you should have been emailed a copy. The link to the project is "strange" (super long), but it seems to work ok.
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
Re: November 2017 Project of the Month
Michael, thanks for the update. I do not receive the projects any more. I have requested them to check it. I have even upgraded my software to V9 and have a login account etc. But the projects do not make it my way. I will reach out again to find out why.
Thanks again.
CSMg
Thanks again.
CSMg
- Adrian
- Vectric Archimage
- Posts: 14684
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: November 2017 Project of the Month
Check your email spam/junk folder. Sometimes the newsletters end up there.
Re: November 2017 Project of the Month
Yea, its not there. I have an email into them to find the resolution, again.
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: November 2017 Project of the Month
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
Re: November 2017 Project of the Month
Michael, Perfect. I really appreciate your kindness.
csmg
csmg
- pd417
- Vectric Craftsman
- Posts: 131
- Joined: Sat Jan 14, 2017 2:05 am
- Model of CNC Machine: NWA Piranha FX XL
Re: November 2017 Project of the Month
Michael..
Planning to do the November Project of the Month, the Holiday Snowman.
In the description you mentioned that if you have a smaller machine (and I do,
a NWA Piranha XL which only has XYZ travel: 12'' x 24'' x 4'') to split the 26"
board into two 13" pieces.
I found a simpler method, which (hopefully) will work. Basically, I resized the
entire design to fit on a 11"x 24" board. Granted, the tray will be a bit smaller than
the original, but it should be fine.
Since you are the creator of this project, do you see any problems in what I did?
Thanks for all your efforts in creating these monthly projects!
Planning to do the November Project of the Month, the Holiday Snowman.
In the description you mentioned that if you have a smaller machine (and I do,
a NWA Piranha XL which only has XYZ travel: 12'' x 24'' x 4'') to split the 26"
board into two 13" pieces.
I found a simpler method, which (hopefully) will work. Basically, I resized the
entire design to fit on a 11"x 24" board. Granted, the tray will be a bit smaller than
the original, but it should be fine.
Since you are the creator of this project, do you see any problems in what I did?
Thanks for all your efforts in creating these monthly projects!
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: November 2017 Project of the Month
Thank you! That sounds like a nice solution. The smaller Snowman will be "cuter", too!
I'm so happy to hear you are enjoying the projects, and thank you for the kind words.
Merry Christmas!
I'm so happy to hear you are enjoying the projects, and thank you for the kind words.
Merry Christmas!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC