Vcarve Inlay Rough Pass Cut Depth

[lfinsr57]

Why couldn't you lie to the machine by altering the Z height when cutting the first pass?

• Example: Total depth of cut is .2" - start depth is .1" and depth of cut is .1".
  
  Raise the Z height to .1, set to 0.0 and cut the first pass.
  
  Then without changing the X or Y zeros, lower Z until it is -.1" and set it back to 0.0.
  
  Cut the second pass.

It's not ideal, and will take a bit more time, but would avoid the cut depth people are trying to avoid. Would this not work?

[TonyMemphis]

Sounds like it ought to work. I might play with that idea and see how it goes. I'm onto some other projects right now.

Thanks!

Tony