Daner wrote:
I cant understand why you cant set the cut depth in this tool path.
It looks like the depth is automaticly set?
One sign I did with 4" letters turned out great, it v carved to aprox .25
Then I did a 8" x 14" and the letters just barely came through.
V carve depths are figured by a combination of bit angle and the distance between the 2 vectors you are carving. For example, a 90 degree bit will cut much shallower than a 30 degree bit for the same vector. That is why it is important to play with some different size bits and the same font to see what looks best.