Hi,
I was just wondering if someone could explain/point me to an example of how to add text to the open book that is included in the clipart in VCarve Pro 8.5?
Obviously the book page is not going to be flat,
thanks
MWinn
Adding text to the 3D book in the clipart
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Adding text to the 3D book in the clipart
Try this tutorial
http://support.vectric.com/tips-and-tri ... ideo_id=11
Or this one if it's not a 3d model you are applying the text to
http://support.vectric.com/tips-and-tri ... video_id=8
http://support.vectric.com/tips-and-tri ... ideo_id=11
Or this one if it's not a 3d model you are applying the text to
http://support.vectric.com/tips-and-tri ... video_id=8
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Adding text to the 3D book in the clipart
The tutorials will get you going, I'm sure. In addition, the FREE Magazine Rack Vectric project uses the same technique for adding lettering to contoured "book" pages (or magazine pages, in this case). You can download the files just to take a peek if you want.
Here's the link:
http://www.vectric.com/cool-stuff/proje ... e_rack.htm
Here's the link:
http://www.vectric.com/cool-stuff/proje ... e_rack.htm
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC