Hi there can someone help please. I am trying to create an outside profile toolpath for a part the programme will allow me to create a profile on the line but not outside or inside the line.
I have attacthed the file.
Thanks
Bob
Cannot create toolpath
-
- Posts: 3
- Joined: Sun May 14, 2017 11:02 am
- Model of CNC Machine: 3 axis mill
Cannot create toolpath
- Attachments
-
- side plate.crv
- (30.5 KiB) Downloaded 64 times
- Adrian
- Vectric Archimage
- Posts: 14544
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Cannot create toolpath
The large shape is an open vector. If you close it you should be able to do what you want as you can't mix open and closed vectors in the same toolpath with an outside/inside cut.
-
- Posts: 3
- Joined: Sun May 14, 2017 11:02 am
- Model of CNC Machine: 3 axis mill
Re: Cannot create toolpath
Hi Adrian
I thought i had closed the vector
Thanks
Bob
I thought i had closed the vector
Thanks
Bob
-
- Posts: 3
- Joined: Sun May 14, 2017 11:02 am
- Model of CNC Machine: 3 axis mill
Re: Cannot create toolpath
Thanks Adrian all sorted now
Thanks again
Bob
Thanks again
Bob