Hello,
I vcarve some board, including QR code.
Look at the attachment : the QR code on the left is just a mirrored copy of the right one.
I need to mirror: i engrave on the back of a plexiglas.
The left reversed one is scrambled when calculating the vcarve path.
Sebastien
bug in carving algo
-
- Posts: 7
- Joined: Sun Mar 05, 2017 2:13 pm
- Model of CNC Machine: self build on Isel frame
- Location: Bessèges, France
- Contact:
bug in carving algo
- Attachments
-
- essai1vectric.crv
- (1.58 MiB) Downloaded 149 times
- Adrian
- Vectric Archimage
- Posts: 14656
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: bug in carving algo
It's just luck that the other one worked ok. You can't have overlapping or touching vectors in a VCarve toolpath or you will get unexpected results.
You will need to edit the image to remove the overlaps etc.
It seems to be quite a rough image, did you generate it by tracing? There are a few QR generators on the internet that will generate SVG files that can be imported directly into VCarve and are a lot cleaner.
You will need to edit the image to remove the overlaps etc.
It seems to be quite a rough image, did you generate it by tracing? There are a few QR generators on the internet that will generate SVG files that can be imported directly into VCarve and are a lot cleaner.
-
- Posts: 7
- Joined: Sun Mar 05, 2017 2:13 pm
- Model of CNC Machine: self build on Isel frame
- Location: Bessèges, France
- Contact:
Re: bug in carving algo
Thanks for the hint, i will look for SVG generator