Lead in/out issues with last path & allowance
-
- Vectric Apprentice
- Posts: 56
- Joined: Tue Sep 27, 2011 7:45 pm
- Model of CNC Machine: CNC router parts 4x4
Lead in/out issues with last path & allowance
V-carve V8.5 seems to ignore my lead in/out (on the final pass) when using the last pass with allowance.
- Attachments
-
- vcarve problem.crv
- (74 KiB) Downloaded 113 times
-
- Vectric Apprentice
- Posts: 58
- Joined: Wed Feb 15, 2017 10:38 pm
- Model of CNC Machine: Piranha FX / VCarve Desktop
- Location: Tucson, Arizona
Re: Lead in/out issues with last path & allowance
I get the same result.
It appears the software ignores leads on the "separate pass"
Strange.
Phil
It appears the software ignores leads on the "separate pass"
Strange.
Phil
- Adrian
- Vectric Archimage
- Posts: 14651
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Lead in/out issues with last path & allowance
One of the many reasons I generate two toolpaths and use the merge toolpaths feature to create one. It gives you far more control over last pass type cuts.