I am trying to create three 0.375 holes using a 3/8" endmill bit. When I calculate the tool path the hole size doubles to .750
I can't figure out what I am doing wrong. I have attached the .crv file. Thanks for the help.
Hole Size Doubles When Calculated
- scovell
- Posts: 44
- Joined: Sat Jul 16, 2016 4:57 pm
- Model of CNC Machine: Shark CNC
- Location: O Fallon, MO USA
Hole Size Doubles When Calculated
- Attachments
-
- 3holes.crv
- (35.5 KiB) Downloaded 131 times
-
- Vectric Craftsman
- Posts: 154
- Joined: Mon Mar 09, 2015 2:04 am
- Model of CNC Machine: CNCRP PRO 4848
Re: Hole Size Doubles When Calculated
Easy one! You have the tool cutting on the line. If the bit is the same size use the Drill tool path with peck drilling. Or cut inside the line on a profile cut like you used. It's set to on the line, that is what doubled the hole size.
- scovell
- Posts: 44
- Joined: Sat Jul 16, 2016 4:57 pm
- Model of CNC Machine: Shark CNC
- Location: O Fallon, MO USA
Re: Hole Size Doubles When Calculated
Thank you for the quick response.cstmwrks wrote:Easy one! You have the tool cutting on the line. If the bit is the same size use the Drill tool path with peck drilling. Or cut inside the line on a profile cut like you used. It's set to on the line, that is what doubled the hole size.