Projekt Stargate alias "Aquagate08"

The Gallery is for posting photographs and images of work machined using Cut2D

Projekt Stargate alias "Aquagate08"

Postby BBMMP » Thu Jun 19, 2008 8:51 pm

Hi,

i have 2007 a idea, i have forgot , and found my old dxf from Stargate , but many are wrong, and not usable for Cut2D and CNC

it's not yet ready for Cutting, i have today over 12hour invested, and i hope it's look like a little as the "original" Gate...

the Prototyp cutting in wood, when it's ok i mill << ?? it from POM or similar plastic ...for Aquarium...

to be continued .. with picture and my German thread


thx for your notice

here the german Thread : http://www.bbmmp.net/forum_08/viewtopic.php?f=10&t=132

when links are not permitted please kill the link thx...


Richard
Attachments
BBMMP_gate_004.gif
My Stargate for Aqua :)
Last edited by BBMMP on Fri Jun 20, 2008 4:41 pm, edited 1 time in total.
Aufgeben gibts nicht .....
User avatar
BBMMP
 
Posts: 4
Joined: Mon Jun 16, 2008 3:20 pm
Location: Austria / Vienna

Aquagate by BBMMP

Postby BBMMP » Fri Jun 20, 2008 4:24 pm

Hi,


20 hour later not a 1:1 copy but it looks like a little the Original.


i hope i become my Tools the next Time that i can cutout and engrave the "Aquagate" ....


look at the Picture , i have 2 Glyphes less then the Original, and i have my Logo insert ;) , that i have no Copyright Problem with other Gate holder...

to be continued with the foot for the Gate....

Dimension are 240x240x20mm from the Gate...


Regards from Austria
Richard
Attachments
BBMMP_gate_010_secondfinal2.gif
my second final Image , the Final following next Time ...
Aufgeben gibts nicht .....
User avatar
BBMMP
 
Posts: 4
Joined: Mon Jun 16, 2008 3:20 pm
Location: Austria / Vienna

Re: Aquagate by BBMMP

Postby RoutnAbout » Sat Jun 21, 2008 2:32 am

BBMMP wrote:...look at the Picture , i have 2 Glyphes less then the Original, and i have my Logo insert ;) , that i have no Copyright Problem with other Gate holder...
Regards from Austria
Richard

Looks good Richard. Can't wait to see the final project.
Roll of Honor <-- Never Forget
________
Don
User avatar
RoutnAbout
Vectric Wizard
 
Posts: 2075
Joined: Mon Sep 19, 2005 11:09 pm
Location: North Manchester, Indiana
Model of CNC Machine: Old Bot with a Rope Pull Start Spindle

Postby metalworkz » Sat Jun 21, 2008 3:42 am

Hi Richard.
It looks very good so far! After taking a closer look at the image I can see how this would take a long time to prep. I am anxious to see the final part also.
Best regards,
Wes
wes.spence@comcast.net
Gingery Machines:
Lathe, Horiz. Mill, Shaper, Leaf Brake
User avatar
metalworkz
Vectric Wizard
 
Posts: 2446
Joined: Mon Mar 31, 2008 3:26 am
Location: Modesto, California 95358 USA
Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers

Re: Aquagate by BBMMP

Postby Len-Tikular » Tue Oct 11, 2011 2:14 pm

BBMMP wrote:Hi,


20 hour later not a 1:1 copy but it looks like a little the Original.


i hope i become my Tools the next Time that i can cutout and engrave the "Aquagate" ....


look at the Picture , i have 2 Glyphes less then the Original, and i have my Logo insert ;) , that i have no Copyright Problem with other Gate holder...

to be continued with the foot for the Gate....

Dimension are 240x240x20mm from the Gate...


Regards from Austria
Richard


Hi Richard this looks cool, did you finish it? would you care to share the dxf or crv?

Best regards

George
Len-Tikular (A glider pilots dream cloud)

Aspire v4.0
User avatar
Len-Tikular
Vectric Apprentice
 
Posts: 356
Joined: Sat Feb 13, 2010 11:27 am
Location: Denholm Scotland.
Model of CNC Machine: Home made revision 3


Return to Cut2D - Gallery

Who is online

Users browsing this forum: No registered users and 3 guests