As some may know I am new to the CNC world and with the help from individuals here i have worked out some issues with getting my machine up and running so that I can turn out some nice products.
Here are my first few items that I have completed.
My first couple of project on my new Probotix Comet
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: My first couple of project on my new Probotix Comet
Woohoo, Beer Thirty! I'm In!
Chris
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: My first couple of project on my new Probotix Comet
I'd say that the machine AND You are off and running!!
Nice Crisp letters with no tearout
Congrats!
Nice Crisp letters with no tearout
Congrats!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
Re: My first couple of project on my new Probotix Comet
Thank you. I will agree with you Sottp55. I took a little bit to control the tear outs but I think i am getting the hang of it now. It does change from wood type to wood type for sure.
Now i just need to figure out how to create edging designs so that I can have decorative edges on some things. I guess until I figure that out I will continue to do them free hand when I need them.
Now i just need to figure out how to create edging designs so that I can have decorative edges on some things. I guess until I figure that out I will continue to do them free hand when I need them.
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: My first couple of project on my new Probotix Comet
IDAK,
You've seen these I imagine, but posting anyways
http://www.vectorart.com/store/?q=Borders%20Fancy
Also look into Point Cutting(plunge cutting,barley twists) Roundover bits, Quite a bit you can do with them in both borders and lettering. I've use both Whiteside and Magnate so for, but hear good things about Amana too.
http://www.talkshopbot.com/forum/showth ... +roundover
Have fun,
scott
You've seen these I imagine, but posting anyways
http://www.vectorart.com/store/?q=Borders%20Fancy
Also look into Point Cutting(plunge cutting,barley twists) Roundover bits, Quite a bit you can do with them in both borders and lettering. I've use both Whiteside and Magnate so for, but hear good things about Amana too.
http://www.talkshopbot.com/forum/showth ... +roundover
Have fun,
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
Re: My first couple of project on my new Probotix Comet
Thanks for sharing those links. I had not seen those yet and will find them very useful.
- bogusz87
- Posts: 11
- Joined: Wed Jun 05, 2013 6:18 pm
- Model of CNC Machine: INFOTEC
- Location: Poznań
- Contact:
Re: My first couple of project on my new Probotix Comet
professional work!
website:
www.portretywdrewnie.pl
www.portretywdrewnie.pl
-
- Posts: 11
- Joined: Thu Jan 15, 2015 2:39 am
- Model of CNC Machine: 5x9 diy cnc router
Re: My first couple of project on my new Probotix Comet
Was that beer sign done with cut2d? And if so what should I search on here to figure out hot to do it?
Nice work btw
Nice work btw