My first couple of project on my new Probotix Comet

The Gallery is for posting photographs and images of work machined using Cut2D

My first couple of project on my new Probotix Comet

Postby IDAK » Thu Dec 18, 2014 6:37 pm

As some may know I am new to the CNC world and with the help from individuals here i have worked out some issues with getting my machine up and running so that I can turn out some nice products.

Here are my first few items that I have completed.


10845913_770872016295259_8238890148841727566_n.jpg
Attachments
10469754_769024953146632_5119334308939937319_n.jpg
IDAK
 
Posts: 11
Joined: Tue Nov 25, 2014 5:21 am
Model of CNC Machine: Probotix Comet

Re: My first couple of project on my new Probotix Comet

Postby ChrisInEstes » Thu Dec 18, 2014 7:14 pm

Woohoo, Beer Thirty! I'm In!

Chris
Aspire 8.5 - PhotoVCarve - FlexiEXPERT 11
User avatar
ChrisInEstes
Vectric Wizard
 
Posts: 779
Joined: Fri Jul 17, 2009 8:00 pm
Location: Estes Park, Colorado, USA
Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3

Re: My first couple of project on my new Probotix Comet

Postby scottp55 » Fri Dec 19, 2014 1:44 am

I'd say that the machine AND You are off and running!! :)
Nice Crisp letters with no tearout :)
Congrats!
User avatar
scottp55
Vectric Wizard
 
Posts: 2077
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: Shopbot Desktop 5.5"Z/spindle/VCP9

Re: My first couple of project on my new Probotix Comet

Postby IDAK » Fri Dec 19, 2014 7:48 am

Thank you. I will agree with you Sottp55. I took a little bit to control the tear outs but I think i am getting the hang of it now. It does change from wood type to wood type for sure.

Now i just need to figure out how to create edging designs so that I can have decorative edges on some things. I guess until I figure that out I will continue to do them free hand when I need them.
IDAK
 
Posts: 11
Joined: Tue Nov 25, 2014 5:21 am
Model of CNC Machine: Probotix Comet

Re: My first couple of project on my new Probotix Comet

Postby scottp55 » Fri Dec 19, 2014 2:39 pm

IDAK,
You've seen these I imagine, but posting anyways :)
http://www.vectorart.com/store/?q=Borders%20Fancy
Also look into Point Cutting(plunge cutting,barley twists) Roundover bits, Quite a bit you can do with them in both borders and lettering. I've use both Whiteside and Magnate so for, but hear good things about Amana too.
http://www.talkshopbot.com/forum/showthread.php?t=14382&highlight=point+cutting+roundover
Have fun,
scott
User avatar
scottp55
Vectric Wizard
 
Posts: 2077
Joined: Thu May 09, 2013 11:30 am
Location: Kennebunkport, Maine, US
Model of CNC Machine: Shopbot Desktop 5.5"Z/spindle/VCP9

Re: My first couple of project on my new Probotix Comet

Postby IDAK » Fri Dec 19, 2014 9:42 pm

Thanks for sharing those links. I had not seen those yet and will find them very useful.
IDAK
 
Posts: 11
Joined: Tue Nov 25, 2014 5:21 am
Model of CNC Machine: Probotix Comet

Re: My first couple of project on my new Probotix Comet

Postby bogusz87 » Sun Feb 22, 2015 8:04 pm

professional work!
website:
www.portretywdrewnie.pl
User avatar
bogusz87
 
Posts: 11
Joined: Wed Jun 05, 2013 6:18 pm
Location: Poznań
Model of CNC Machine: INFOTEC

Re: My first couple of project on my new Probotix Comet

Postby turbocvette » Fri Mar 06, 2015 1:44 am

Was that beer sign done with cut2d? And if so what should I search on here to figure out hot to do it?
Nice work btw
turbocvette
Vectric Apprentice
 
Posts: 11
Joined: Thu Jan 15, 2015 2:39 am
Model of CNC Machine: 5x9 diy cnc router


Return to Cut2D - Gallery

Who is online

Users browsing this forum: No registered users and 2 guests