Support Pages and Frequently Asked Questions

The Gallery is for posting photographs and images of work machined using Cut2D

Re: Support Pages and Frequently Asked Questions

Postby Rcnewcomb » Thu Apr 19, 2018 11:08 pm

I am wondering where I can find more information in the form of tutorial videos.

Tutorial Videos
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3076
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Support Pages and Frequently Asked Questions

Postby lockeb » Mon Apr 30, 2018 8:25 pm

i am looking for some assistance on feed and speed for 1/2 round nose carving in 3/4 plywood. depth .25 inches. i also have 1/4 inch round nose if it will work better.
I'm attempting to make a spiral design on a 20 inch serving tray for may Grand daughter's wedding.
Her design request.
lockeb
 
Posts: 26
Joined: Wed Dec 05, 2012 4:26 pm
Location: westville, Florida
Model of CNC Machine: Shark Mako HD

Re: Support Pages and Frequently Asked Questions

Postby Creation in Wood » Mon Apr 30, 2018 8:49 pm

1/2" BN 2- flute cutting, 3/4" plywood using .022 Chip Load = 180ipm @ 15,000rpm
1/4" BN 2- Flute cutter, 3/4" plywood using .010 chip load = 200ipm @ 10,000rpm
Thank You
Doug
User avatar
Creation in Wood
Vectric Wizard
 
Posts: 361
Joined: Thu May 28, 2015 8:58 pm
Location: Monument, Colorado USA
Model of CNC Machine: Legacy Maverick CNC 4x8

Re: Support Pages and Frequently Asked Questions

Postby lockeb » Mon Apr 30, 2018 11:17 pm

Thank You!
lockeb
 
Posts: 26
Joined: Wed Dec 05, 2012 4:26 pm
Location: westville, Florida
Model of CNC Machine: Shark Mako HD

Re: Support Pages and Frequently Asked Questions

Postby Adrian » Tue May 01, 2018 8:13 am

Seems a pretty fast feed rate for a Shark type machine.
User avatar
Adrian
Vectric Archimage
 
Posts: 8454
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Support Pages and Frequently Asked Questions

Postby Creation in Wood » Tue May 01, 2018 2:33 pm

I agree, but I was not told which CNC manufacturer. I run a Maverick, which I would turn up to 300ipm, the sweet spot.
Thank You
Doug
User avatar
Creation in Wood
Vectric Wizard
 
Posts: 361
Joined: Thu May 28, 2015 8:58 pm
Location: Monument, Colorado USA
Model of CNC Machine: Legacy Maverick CNC 4x8

Re: Support Pages and Frequently Asked Questions

Postby lockeb » Wed May 16, 2018 2:58 am

Sorry, I have a shark mako cnc w router. So I need to slow it down?
lockeb
 
Posts: 26
Joined: Wed Dec 05, 2012 4:26 pm
Location: westville, Florida
Model of CNC Machine: Shark Mako HD

Re: Support Pages and Frequently Asked Questions

Postby lockeb » Wed May 16, 2018 3:05 am

I made a much simpler tray, or 16 simpler trays.
Attachments
IMG_4958.JPG
IMG_4972.JPG
lockeb
 
Posts: 26
Joined: Wed Dec 05, 2012 4:26 pm
Location: westville, Florida
Model of CNC Machine: Shark Mako HD

Previous

Return to Cut2D - Gallery

Who is online

Users browsing this forum: No registered users and 5 guests