GaryR6 wrote:Thanks for your work. It should be fun, fun, fun.
I hope so!!
haha
Thanks!!
Re: A complete Guitar with Cud2D 1.5
Posted: Mon Apr 02, 2012 4:25 pm
by jam1962
Thank you.
Re: A complete Guitar with Cud2D 1.5
Posted: Mon Apr 02, 2012 4:30 pm
by Alex Navarro
Model based on Stratocaster body and Ibanez neck.
Body with 5 mm minus of contour of the Stratocaster by Fender.
Cavity for 2 humbuker and 1 central single pickups.
Body thickness: 45mm
Tremulo cavity
Bolt on neck
25 inches of scale
12 inches of radius fingerboard
24 frets
Re: A complete Guitar with Cud2D 1.5
Posted: Mon Apr 02, 2012 4:52 pm
by angelkarla
Hi Alex I Know its cheecky but any chance of stl file for rear neck as tooling dosent show in Aspire as its different program
Art
Re: A complete Guitar with Cud2D 1.5
Posted: Tue Apr 03, 2012 1:15 am
by glenn
Alex,
I have to try this---looks real good!
Thanks,
Glenn
Re: A complete Guitar with Cud2D 1.5
Posted: Tue Apr 03, 2012 1:54 am
by Alex Navarro
angelkarla wrote:Hi Alex I Know its cheecky but any chance of stl file for rear neck as tooling dosent show in Aspire as its different program
Art
Hi
You Aspire must be the version 3.5.
Just the STL, ok... below STL and Cut3D
glenn wrote:Alex,
I have to try this---looks real good!
Thanks,
Glenn
Re: A complete Guitar with Cud2D 1.5
Posted: Tue Apr 03, 2012 2:38 am
by Gc3
Thank you!!!
Re: A complete Guitar with Cud2D 1.5
Posted: Tue Apr 03, 2012 10:12 am
by angelkarla
Alex Many thanks for the stl downloaded ok.
My son has made a Gibson copy 24-3/4" scale but did it the hard way by hand no cnc.
I am afraid my patience is limited.
Art
Re: A complete Guitar with Cud2D 1.5
Posted: Tue Apr 03, 2012 11:13 am
by Alex Navarro
angelkarla wrote:Alex Many thanks for the stl downloaded ok.
My son has made a Gibson copy 24-3/4" scale but did it the hard way by hand no cnc.
I am afraid my patience is limited.
Art
Some like this?
This is a video I did about a complete guitar on Aspire with English subtitles and more than 3 hours during. I got for others softwares too like a Rhinoc,eros, VCarve or Cut2d+Cut3d...
See in my web: www.3dcncguitars.com/guitars.htm - I´m make changes in my website and soon I´ll put more classic models there!
Have you some photos of you guitar?
Any question if I can help you, write me!
Best Regards
Alex
Re: A complete Guitar with Cud2D 1.5
Posted: Sun Apr 22, 2012 6:52 pm
by Alex Navarro
Les Paul Bod
In some days I will got a complete Les Paul and PRS models.
