A complete Guitar with Cud2D 1.5

The Gallery is for posting photographs and images of work machined using Cut2D
User avatar
Alex Navarro
Vectric Craftsman
Posts: 202
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

Hi guys

Here is the neck. This guitar is very hard to make!
Now, some more things to do and then I go to the PRS!
Attachments
Classic Top
Classic Top
Stronger waves
Stronger waves
Based on an Epiphone
Based on an Epiphone
Alex Navarro

User avatar
Alex Navarro
Vectric Craftsman
Posts: 202
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

on the previous page has the necks!
Alex Navarro

simso
Posts: 43
Joined: Sun Oct 16, 2011 1:02 pm
Model of CNC Machine: Syntec

Re: A complete Guitar with Cud2D 1.5

Post by simso »

Alex, very impressed, so much so I went to your website, I repair guitars for a living so this can be invaluable to me.

Have a 8 tool cnc router.

I purchased one of your designs, I like them all......but I could not get anything delivered, picked a design, went to paypal and paid but no delivery of design or process to be able to recieve design, what do I need to do.

User avatar
Alex Navarro
Vectric Craftsman
Posts: 202
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

simso wrote:Alex, very impressed, so much so I went to your website, I repair guitars for a living so this can be invaluable to me.

Have a 8 tool cnc router.

I purchased one of your designs, I like them all......but I could not get anything delivered, picked a design, went to paypal and paid but no delivery of design or process to be able to recieve design, what do I need to do.
Hello Steve

I answered you in your e-mail.

Essential: I need give explanation for all because is not clear in my website.
Sorry for the inconvenience.
We have a problem of time differences, because I'm in Brazil.
I don´t have an automated service for sending the material as it usually does not work fine. Normally, each client have some note about his purchase, then I think better let how is.
I can take a litte of time for send the material after purchase, because many times I´m out my office. But this take no more than 1 day (24h).

I'm asking at a company develop a more professional site for me.
This work began modest, but will gaining more proportions faster than I could imagine. I still work alone and work still for decorations company.
I think about now seriously let it for work just with guitars that I like more and find one person to work together with 2,5D/3D artworks.

Thank very all
Attachments
FromRhino_02.jpg
Alex Navarro

User avatar
Alex Navarro
Vectric Craftsman
Posts: 202
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Re: A complete Guitar with Cud2D 1.5

Post by Alex Navarro »

Hi

let now to talk about guitars, concentrating in link below.
VCarve Pro is fine because is between Cut2D and Aspire. This way we can divide experiences with all Vectric users. :wink:

ok? :roll:

http://www.vectric.com/forum/viewtopic.php?f=5&t=12036
Alex Navarro

Post Reply