I made these out of Corian. Just used a 1/8 end mill and design it in Cut2D
A couple of light switch plates.
-
- Posts: 25
- Joined: Sun Dec 19, 2010 11:42 pm
- Model of CNC Machine: Modified Wabeco mill
- Location: Scotland
- Contact:
Re: A couple of light switch plates.
I like these. I particularly like the matching colour of the screw heads, which is a nice touch.
What speeds and feeds did you use?
What speeds and feeds did you use?
HomeShopper
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: A couple of light switch plates.
That's a good idea. It gets the cog moving for sure. Heck just do a series of those and you have a nice gift set. Thank for posting.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
-
- Vectric Craftsman
- Posts: 250
- Joined: Mon Jul 18, 2011 7:54 pm
- Model of CNC Machine: CNC router
- Location: Houston, Texas
Re: A couple of light switch plates.
Nice work! That is a good tight fit around the switch, very professional job.
RickO