Latest projects in glass, wood, and tile.
Ray
Some of the things I have been making
-
rdean33422
- Vectric Craftsman
- Posts: 129
- Joined: Wed Mar 30, 2011 5:55 pm
- Model of CNC Machine: RF31, 4X8 Router both CNC
Some of the things I have been making
- Attachments
-
-
-
-
-
Ausworkshop
- Posts: 45
- Joined: Wed May 11, 2011 1:32 pm
- Model of CNC Machine: cncshark
- Location: Australia
Re: Some of the things I have been making
Very good, I'm still learning how to use mine so I havent done much yet.
Re: Some of the things I have been making
what tool do you use to engraving glass.
Tomas
Tomas
Autograv IV
1000 x 600
Vcarve pro. v6.5
Autocad 10
3Ds max 2011
Autodesk Inventor 2012
1000 x 600
Vcarve pro. v6.5
Autocad 10
3Ds max 2011
Autodesk Inventor 2012
-
rdean33422
- Vectric Craftsman
- Posts: 129
- Joined: Wed Mar 30, 2011 5:55 pm
- Model of CNC Machine: RF31, 4X8 Router both CNC
Re: Some of the things I have been making
On glass I have been using a 1/8" tapered diamond bit in a spring loaded chuck that I made. Been running at 15 inches a minute with a water mist.
For the porcelain tile I didn't have any special cutters so I used a 1/4" cement bit set at 0.075 for the lettering and a 1/8" cement bit set at 0.050 for the trees. I have some diamond bits on order so will see how they work.
Thank you for the compliments.
Ray
For the porcelain tile I didn't have any special cutters so I used a 1/4" cement bit set at 0.075 for the lettering and a 1/8" cement bit set at 0.050 for the trees. I have some diamond bits on order so will see how they work.
Thank you for the compliments.
Ray