Page 1 of 1
Some of the things I have been making
Posted: Thu May 12, 2011 9:37 pm
by rdean33422
Latest projects in glass, wood, and tile.
Ray
Re: Some of the things I have been making
Posted: Sat May 14, 2011 9:23 am
by Ausworkshop
Very good, I'm still learning how to use mine so I havent done much yet.
Re: Some of the things I have been making
Posted: Sun May 15, 2011 9:21 pm
by Tde1806
what tool do you use to engraving glass.
Tomas
Re: Some of the things I have been making
Posted: Mon May 16, 2011 1:22 am
by rdean33422
On glass I have been using a 1/8" tapered diamond bit in a spring loaded chuck that I made. Been running at 15 inches a minute with a water mist.
For the porcelain tile I didn't have any special cutters so I used a 1/4" cement bit set at 0.075 for the lettering and a 1/8" cement bit set at 0.050 for the trees. I have some diamond bits on order so will see how they work.
Thank you for the compliments.
Ray