Page 1 of 1

Outside machine limits

PostPosted: Fri Sep 13, 2019 5:42 pm
by helensdad
Hi, I am having trouble starting a job. After setting work zero I am getting 'outside machine limits' error. Work area is X 325mm, Y 525mm and Z 57mm. The workpiece is X 238mm, Y 480mm and Z 21mm . Safe Z is set to 3 mm. Try as I might I cannot get the file to run. I tried a file with the same settings and material size and all worked. I am baffled! Any help would be gratefully received, this job is for a birthday present tomorrow.

Re: Outside machine limits

PostPosted: Fri Sep 13, 2019 5:45 pm
by helensdad
I have tried attaching the CRV file but having no luck...

Re: Outside machine limits

PostPosted: Fri Sep 13, 2019 6:56 pm
by Rcnewcomb
I have tried attaching the CRV file but having no luck...

if the file is ove 2MB then put it on a site like drive.google.com or dropbox.com, and then share the link to the file here.

Re: Outside machine limits

PostPosted: Fri Sep 13, 2019 7:32 pm
by helensdad
Many thanks, I will sort tomorrow..

Re: Outside machine limits

PostPosted: Fri Sep 13, 2019 7:47 pm
by Adrian
Check for offsets in the job and any stray little vectors that are outside of the area but might be included in the toolpath.