Passes Per Cut Changing in Vectric
Passes Per Cut Changing in Vectric
Ok, i've been trying to figure some things out with this 2dpro and i've hit a slump. I have one issue, that isn't damaging, but more or less pita to deal with is the "passes per cut" that vectric puts in place. I'd like to know more about how to change this in a vector, and it not revert back to the initial setting. I am trying to put a "recess" around a cutout for a door stop. It needs to be 0.19", well vectric keeps saying "5 passes" so I can to 1 pass and it somehow keeps reverting to "5" when I check the vector. I've deleted and then taken the number down and hit "ok" and it seems it keeps doing that...
- TReischl
- Vectric Wizard
- Posts: 4652
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: Passes Per Cut Changing in Vectric
What have you set for the depth of cut possible for the tool?
I don't run Cut2D but I would surmise it has a tool database in which depth of cut for tools is set.
I don't run Cut2D but I would surmise it has a tool database in which depth of cut for tools is set.
"If you see a good fight, get in it." Dr. Vernon Johns
- Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Passes Per Cut Changing in Vectric
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: Passes Per Cut Changing in Vectric
Solved! thanks fellas!