I've defined a simple 300mm square of 2mm material, and have drawn a rectangular vector on it. I've set the cutting depth to 3mm, I get the warning that the material will be cut through, but when I calculate the toolpath all that happens is that a line is drawn showing the toolpath but when I try to remove the outside material by double clicking on it I get a warning that ALL the material has been selected, and the toolpath obviously hasn't removed any material. I've obviously missed something but goodness knows what.
Any help would be much appreciated.
preview toolpath not cutting material
-
- Posts: 7
- Joined: Sun Apr 21, 2019 6:14 am
- Model of CNC Machine: not chosen yet
- Rcnewcomb
- Vectric Archimage
- Posts: 5911
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: preview toolpath not cutting material
Can you post your file here for us to examine?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Posts: 7
- Joined: Sun Apr 21, 2019 6:14 am
- Model of CNC Machine: not chosen yet
Re: preview toolpath not cutting material
It's ok thanks I think I've worked out what I was doing wrong. Sorry for the time waste.
Re: preview toolpath not cutting material
Grrrrrr... suspense is killing me! lol.ElliotandNolan wrote:It's ok thanks I think I've worked out what I was doing wrong. Sorry for the time waste.