Good Morning
How to orient the paths in sequence to right for example.
It's possible?
sorry about my English
thanks
Path guidance
- Adrian
- Vectric Archimage
- Posts: 14547
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Path guidance
You'll need to explain a bit more what it is you want to do and ideally attach a file.
It could be that you need to close the vector but without knowing what the end result should be that could be wrong.
It could be that you need to close the vector but without knowing what the end result should be that could be wrong.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Path guidance
If you are looking for the cut path to be from the vector on the left then move to the right vector and start cutting use the node editing tool to change the starting node as marked.
Hope this makes sense.
Hope this makes sense.
John
Maker of Chips
Maker of Chips
Re: Path guidance
I am with version 8.517 and I noticed that in version 9.5 it is possible to edit the starting point of cut ...
But I can not update ...
But I can not update ...
- Adrian
- Vectric Archimage
- Posts: 14547
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Path guidance
You can edit the starting point of a cut in 8.5 as well.