Path guidance

Post general information and questions relating to Cut2D in this Forum.
Post Reply
bcontrol
Posts: 5
Joined: Mon Aug 29, 2016 2:31 pm
Model of CNC Machine: cutter

Path guidance

Post by bcontrol »

Good Morning

How to orient the paths in sequence to right for example.

It's possible?

sorry about my English

thanks :D
Attachments
teste.png

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Path guidance

Post by Adrian »

You'll need to explain a bit more what it is you want to do and ideally attach a file.

It could be that you need to close the vector but without knowing what the end result should be that could be wrong.

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Path guidance

Post by highpockets »

If you are looking for the cut path to be from the vector on the left then move to the right vector and start cutting use the node editing tool to change the starting node as marked.

Hope this makes sense.
Image 252.png
John
Maker of Chips

bcontrol
Posts: 5
Joined: Mon Aug 29, 2016 2:31 pm
Model of CNC Machine: cutter

Re: Path guidance

Post by bcontrol »

I am with version 8.517 and I noticed that in version 9.5 it is possible to edit the starting point of cut ...

But I can not update ...

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Path guidance

Post by Adrian »

You can edit the starting point of a cut in 8.5 as well.

Post Reply