Path guidance

Post general information and questions relating to Cut2D in this Forum.

Path guidance

Postby bcontrol » Fri Oct 19, 2018 2:29 pm

Good Morning

How to orient the paths in sequence to right for example.

It's possible?

sorry about my English

thanks :D
Attachments
teste.png
bcontrol
 
Posts: 5
Joined: Mon Aug 29, 2016 2:31 pm
Model of CNC Machine: cutter

Re: Path guidance

Postby Adrian » Fri Oct 19, 2018 2:51 pm

You'll need to explain a bit more what it is you want to do and ideally attach a file.

It could be that you need to close the vector but without knowing what the end result should be that could be wrong.
User avatar
Adrian
Vectric Archimage
 
Posts: 8614
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Path guidance

Postby highpockets » Fri Oct 19, 2018 3:28 pm

If you are looking for the cut path to be from the vector on the left then move to the right vector and start cutting use the node editing tool to change the starting node as marked.

Hope this makes sense.

Image 252.png
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1870
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Path guidance

Postby bcontrol » Fri Oct 19, 2018 3:34 pm

I am with version 8.517 and I noticed that in version 9.5 it is possible to edit the starting point of cut ...

But I can not update ...
bcontrol
 
Posts: 5
Joined: Mon Aug 29, 2016 2:31 pm
Model of CNC Machine: cutter

Re: Path guidance

Postby Adrian » Fri Oct 19, 2018 4:06 pm

You can edit the starting point of a cut in 8.5 as well.
User avatar
Adrian
Vectric Archimage
 
Posts: 8614
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48


Return to Cut2D - General

Who is online

Users browsing this forum: No registered users and 8 guests