Removing line

Post general information and questions relating to Cut2D in this Forum.
Post Reply
cusoak
Vectric Wizard
Posts: 486
Joined: Mon Nov 06, 2017 1:57 pm
Model of CNC Machine: Shapeoko 3D XXL

Removing line

Post by cusoak »

In the attached file this showers a cut sky line of columbus. I would like to know how to remove the bottom line that runs from side to side.
I want to be able to add longer side to make it fit a larger height board ,so I can put script under it and then cut it out.
Jeff
Attachments
z columbus silhouette.crv
(312.5 KiB) Downloaded 149 times

Beltramidave
Vectric Wizard
Posts: 524
Joined: Thu May 14, 2015 12:23 am
Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
Location: Bemidji, MN
Contact:

Re: Removing line

Post by Beltramidave »

Go to node edit, place cursor on bottom line corners, press c. Then click back on bottom line and delete.
Attachments
z columbus silhouette_rev.crv
(308.5 KiB) Downloaded 141 times
Dave
https://lakesedgewoodcraft.com/

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Removing line

Post by Adrian »

You could also hover over the lines in node edit mode and press D.

cusoak
Vectric Wizard
Posts: 486
Joined: Mon Nov 06, 2017 1:57 pm
Model of CNC Machine: Shapeoko 3D XXL

Re: Removing line

Post by cusoak »

Thanks , I figure is would be something easy.
Jeff

Post Reply