In the attached file this showers a cut sky line of columbus. I would like to know how to remove the bottom line that runs from side to side.
I want to be able to add longer side to make it fit a larger height board ,so I can put script under it and then cut it out.
Jeff
Removing line
-
- Vectric Wizard
- Posts: 486
- Joined: Mon Nov 06, 2017 1:57 pm
- Model of CNC Machine: Shapeoko 3D XXL
Removing line
- Attachments
-
- z columbus silhouette.crv
- (312.5 KiB) Downloaded 149 times
-
- Vectric Wizard
- Posts: 528
- Joined: Thu May 14, 2015 12:23 am
- Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
- Location: Bemidji, MN
- Contact:
Re: Removing line
Go to node edit, place cursor on bottom line corners, press c. Then click back on bottom line and delete.
- Attachments
-
- z columbus silhouette_rev.crv
- (308.5 KiB) Downloaded 141 times
Dave
https://lakesedgewoodcraft.com/
https://lakesedgewoodcraft.com/
- Adrian
- Vectric Archimage
- Posts: 14684
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Removing line
You could also hover over the lines in node edit mode and press D.
-
- Vectric Wizard
- Posts: 486
- Joined: Mon Nov 06, 2017 1:57 pm
- Model of CNC Machine: Shapeoko 3D XXL
Re: Removing line
Thanks , I figure is would be something easy.
Jeff
Jeff