Hi All
completed the first test cut on the Workbee which went well but with a couple of minor errors (toolpath left a ridge to the bottom of the work piece, which I have put down to material movement, we wait and see on that one.
todays obvious question from the newby as follows:
I wish to cut out a shape with a 0.25mm cutter, however I then wish to add txt with a 0.125 cutter, can this be done in one design or do I need to copy the design and add the txt only on design no 2 with the smaller cutter, or do I use the filter option or how do I do this please.
Many Thanks for your help and advice
D
different cutters
-
- Posts: 25
- Joined: Wed Nov 29, 2017 9:05 pm
- Model of CNC Machine: workbee
- Adrian
- Vectric Archimage
- Posts: 14690
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: different cutters
The whole thing can be done in one Cut2D file but you'll need to generate two cutting files. One for the 0.25mm bit and one for 0.125mm bit.