different cutters

Post general information and questions relating to Cut2D in this Forum.

different cutters

Postby David Tolley » Fri Dec 08, 2017 11:33 am

Hi All

completed the first test cut on the Workbee which went well but with a couple of minor errors (toolpath left a ridge to the bottom of the work piece, which I have put down to material movement, we wait and see on that one.

todays obvious question from the newby as follows:

I wish to cut out a shape with a 0.25mm cutter, however I then wish to add txt with a 0.125 cutter, can this be done in one design or do I need to copy the design and add the txt only on design no 2 with the smaller cutter, or do I use the filter option or how do I do this please.

Many Thanks for your help and advice

David Tolley
Posts: 25
Joined: Wed Nov 29, 2017 9:05 pm
Model of CNC Machine: workbee

Re: different cutters

Postby Adrian » Fri Dec 08, 2017 12:30 pm

The whole thing can be done in one Cut2D file but you'll need to generate two cutting files. One for the 0.25mm bit and one for 0.125mm bit.
User avatar
Vectric Archimage
Posts: 10086
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Return to Cut2D - General

Who is online

Users browsing this forum: No registered users and 6 guests