Post-Processor: Mach 3 Arcs vs. ATC Arcs
Post-Processor: Mach 3 Arcs vs. ATC Arcs
I just installed Cut2D 1.5 on a new PC but didn't check my settings on my old one where I ran Cut2D for several years. I output to a CNC mill running Mach 3 (inches), so I'm pretty sure the post-processor I used was one of the Mach 3 ones, but I don't recall whether it was Arcs or ATC Arcs. What's the difference? Thanks.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Post-Processor: Mach 3 Arcs vs. ATC Arcs
ATC stands for Automatic Tool Changer, if you don't have one choose Arcs.
John
Maker of Chips
Maker of Chips
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: Post-Processor: Mach 3 Arcs vs. ATC Arcs
If you want to output multiple toolpaths with different tools, then you need to use an ATC post, which includes tool change commands.
Many people that don't have ATC's use the ATC posts.
Many people that don't have ATC's use the ATC posts.
Gerry - http://www.thecncwoodworker.com
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Post-Processor: Mach 3 Arcs vs. ATC Arcs
Please expound on this. Would the cnc then go to a known location park and wait for the tool change. I actually use a flashcut controller on my unit but would love to be able to load all of my toolpaths in one go.ger21 wrote:If you want to output multiple toolpaths with different tools, then you need to use an ATC post, which includes tool change commands.
Many people that don't have ATC's use the ATC posts.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
Re: Post-Processor: Mach 3 Arcs vs. ATC Arcs
I usually make multiple copies of things and find it easier to load a single tool's tool path, then subject each piece of material to it before changing the tool, than performing all operations on each piece in turn.
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: Post-Processor: Mach 3 Arcs vs. ATC Arcs
Well, it depends on the control that you're using.dwilli9013 wrote: Please expound on this. Would the cnc then go to a known location park and wait for the tool change. I actually use a flashcut controller on my unit but would love to be able to load all of my toolpaths in one go.
I've written macros for Mach3 and UCCNC, so that when there's an M6 in the code, the machine moves to a user defined tool change position, and stops and waits for you to change the tool. After the tool is changed, the machine moves to a Z zero plate, zeroes the new tool, and continues cutting. A lot of the members here use my custom screens with these macros.
Gerry - http://www.thecncwoodworker.com
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Post-Processor: Mach 3 Arcs vs. ATC Arcs
I use Gerry's 2010 Screenset on my Mach3. You still have to manually change the tools, but it does speed things up.
John
Maker of Chips
Maker of Chips