Page 10 of 11

Re: Support Pages and Frequently Asked Questions

PostPosted: Thu Apr 19, 2018 11:08 pm
by Rcnewcomb
I am wondering where I can find more information in the form of tutorial videos.

Tutorial Videos

Re: Support Pages and Frequently Asked Questions

PostPosted: Mon Apr 30, 2018 8:25 pm
by lockeb
i am looking for some assistance on feed and speed for 1/2 round nose carving in 3/4 plywood. depth .25 inches. i also have 1/4 inch round nose if it will work better.
I'm attempting to make a spiral design on a 20 inch serving tray for may Grand daughter's wedding.
Her design request.

Re: Support Pages and Frequently Asked Questions

PostPosted: Mon Apr 30, 2018 8:49 pm
by Creation in Wood
1/2" BN 2- flute cutting, 3/4" plywood using .022 Chip Load = 180ipm @ 15,000rpm
1/4" BN 2- Flute cutter, 3/4" plywood using .010 chip load = 200ipm @ 10,000rpm

Re: Support Pages and Frequently Asked Questions

PostPosted: Mon Apr 30, 2018 11:17 pm
by lockeb
Thank You!

Re: Support Pages and Frequently Asked Questions

PostPosted: Tue May 01, 2018 8:13 am
by Adrian
Seems a pretty fast feed rate for a Shark type machine.

Re: Support Pages and Frequently Asked Questions

PostPosted: Tue May 01, 2018 2:33 pm
by Creation in Wood
I agree, but I was not told which CNC manufacturer. I run a Maverick, which I would turn up to 300ipm, the sweet spot.

Re: Support Pages and Frequently Asked Questions

PostPosted: Wed May 16, 2018 2:58 am
by lockeb
Sorry, I have a shark mako cnc w router. So I need to slow it down?

Re: Support Pages and Frequently Asked Questions

PostPosted: Wed May 16, 2018 3:05 am
by lockeb
I made a much simpler tray, or 16 simpler trays.

Re: Support Pages and Frequently Asked Questions

PostPosted: Sun Dec 16, 2018 6:18 pm
by 1jonboy
Hi I just bought a new piranha CNC fx and I did opt for the laser attachment. However, other than the booklet that comes with the laser I'm not finding much support videos for the laser. I know it is capable of actually creating a laser photo quality sketch. Any info on creating vectors for the uploaded photo or design would be awesome. Thanks, Jon

Re: Support Pages and Frequently Asked Questions

PostPosted: Wed May 01, 2019 1:38 am
by Aaron Laverty
I am new to cnc, have done several carves using easel, but would like to learn to download files and import into vcarve, learn how to carve them.

Re: Support Pages and Frequently Asked Questions

PostPosted: Wed May 01, 2019 2:19 am
by Rcnewcomb

Re: Support Pages and Frequently Asked Questions

PostPosted: Fri May 03, 2019 5:44 pm
by Shoekel
I am using vcarve pro and when I design a part to be cut out, occasionally it will cut 1 line on the inside of the line and then the next line is on the outside.
How do I fix that?

Re: Support Pages and Frequently Asked Questions

PostPosted: Fri May 03, 2019 6:16 pm
by Adrian
Shoekel wrote:I am using vcarve pro and when I design a part to be cut out, occasionally it will cut 1 line on the inside of the line and then the next line is on the outside.
How do I fix that?

The vectors are open. If they're meant to be closed then you can use the join tools to close them. If they are meant to be open then you can change the start node on the vectors that are cutting the other side or create two toolpaths with one inside and one outside.

Re: Support Pages and Frequently Asked Questions

PostPosted: Fri Jun 28, 2019 1:18 pm
by JoeBlow
Question regarding End User License Agreement....

I am using the current version of Aspire and in the clipart is a 3d model that is just perfect on a product I make. I have only prototyped a few and have not sold or given away any of these with the clipart model. I don't want to be that guy and I highly respect copyright laws. With that said, I have searched the internet for a similar model that I could purchase and use for resale on my product. No luck. I have considered hiring someone to make me a similar model but don't want to be that guy that does a few tweeks and stands by the "artistic expression" nonsense justification.

Went to the Design & Make site and go figure...the same exact model is available for purchase. Having read the EULA on their site, it appears to me that I can purchase the model I want to use and apply it to my product for resale. Legalese is not my chosen language so I am asking for clarification on this.

I can't use the free model in the clipart for resale on a product but I can purchase the exact same model on Design & Make and sell my product freely?

Thanks for any clarification and, by the way, cost is irrelevant as long as I stay within legal bounds.

Re: Support Pages and Frequently Asked Questions

PostPosted: Fri Jun 28, 2019 8:00 pm
by scottp55
I'd take it as gospel, that D&M stuff is original and safe to use on any project for sale.
The other is probably a copy with a few tweaks to beat countries weak on copyright laws...if not an exact copy :x

Spent probably 8 hours online in the last few days searching for "Critter" 3D models, and it's just downright discouraging to see the outright theft of good models with a price tag under $2USD.
Found an Owl model I spent $28 bucks for at CGTraders...and it was either under $5 or given away for free with a donation to an Eastern European country for an orphanage or such :twisted:

Wish there was some kind of centralized directory of sources to authenticate origin!!
But at $2, you KNOW somebody is playing fast and loose with someone else's work :cry:
Go D&M and rest easy:)
scott