Toolpath problem - Outside/Right is offset

Post general information and questions relating to Cut2D in this Forum.

Toolpath problem - Outside/Right is offset

Postby Slaney » Mon May 13, 2019 6:32 pm

Hi, I am having problems when trying to use the “Outside/Right” toolpath from 2D profile option. The preview of the toolpath shows not only that the path does not follow the 6 pieces to be cut from the plywood, but that it applies a 3.5 cm offset around the combined 6 polygons. Any idea what is happening here? See attached images. If I select the “on” toolpath, it displays the anticipated paths. Any guidance is appreciated,

Thanks.
Attachments
8BBA9DB7-6B36-4306-AAB0-A98EB87D6482.jpeg
Outside/right
F4A68A4E-C8E4-4077-B610-9800D273E300.jpeg
Slaney
 
Posts: 2
Joined: Mon May 13, 2019 5:39 am
Model of CNC Machine: Shapeoko 3 XXL

Re: Toolpath problem - Outside/Right is offset

Postby Rcnewcomb » Mon May 13, 2019 6:53 pm

If you could upload your CRV file that would help us to help you.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 3395
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: GCnC/WinCNC

Re: Toolpath problem - Outside/Right is offset

Postby ger21 » Mon May 13, 2019 7:23 pm

It looks like the parts are too close together for the 1/4" tool (6.35mm) to fit between them. Create toolpaths for each part separately, and you'll see how they overlap.
Gerry - http://www.thecncwoodworker.com
ger21
Vectric Wizard
 
Posts: 1390
Joined: Sun Sep 16, 2007 2:59 pm
Location: Shelby Township, MI, USA
Model of CNC Machine: Custom DIY

Re: Toolpath problem - Outside/Right is offset

Postby Slaney » Tue May 14, 2019 1:31 am

Thanks, I will add more space between parts and see what transpires.
Slaney
 
Posts: 2
Joined: Mon May 13, 2019 5:39 am
Model of CNC Machine: Shapeoko 3 XXL


Return to Cut2D - General

Who is online

Users browsing this forum: No registered users and 4 guests