Slot together project

Post general information and questions relating to Cut2D in this Forum.

Slot together project

Postby cusoak » Thu Dec 07, 2017 2:19 pm

I just watched the Slot together project.
What a very informing video. I watched with amazement on how easy it was to do different functions
My question is this. Does the Cut 2D program allow you to do everything that was shown in that video.
When I buy my Cut 2d program would I be able to take that design and take some of the parts off and put on another piece of wood to allow me to use the 24x24 design area.
Jeff
cusoak
 
Posts: 41
Joined: Mon Nov 06, 2017 1:57 pm
Model of CNC Machine: Shapeoko 3D XXL

Re: Slot together project

Postby Adrian » Thu Dec 07, 2017 3:06 pm

The restrictions you're coming up against in the trial don't apply to the full version. With the trial version you can't make any changes to the free projects otherwise it will be possible to change the project entirely and bypass the cutting restrictions.

With the full version you can move parts around as much as you want and generate toolpaths without problems.
User avatar
Adrian
Vectric Archimage
 
Posts: 7548
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Slot together project

Postby cusoak » Thu Dec 07, 2017 3:17 pm

Thanks.
Santa is going to bring me the Cut2d Program.
Jeff
cusoak
 
Posts: 41
Joined: Mon Nov 06, 2017 1:57 pm
Model of CNC Machine: Shapeoko 3D XXL

Re: Slot together project

Postby flatheadyoungin » Thu Dec 07, 2017 8:21 pm

Share the video link, please.....
flatheadyoungin
Vectric Apprentice
 
Posts: 72
Joined: Fri Sep 18, 2015 4:14 pm
Location: Portsmouth, OH
Model of CNC Machine: DIY Joe's Evo. 4x8 and Laguna Swift 4x8

Re: Slot together project

Postby cusoak » Fri Dec 08, 2017 1:56 pm

http://vectric.eu/Videos/Vectric/V8/Slo ... er/SlotTog
This should get you there.
It is a great video
I learned how to use lot of different tools and was to help designing
It is about an hour long.
The nice thing I really like about there video's is that you can download them and and have the for reference.
Jeff
cusoak
 
Posts: 41
Joined: Mon Nov 06, 2017 1:57 pm
Model of CNC Machine: Shapeoko 3D XXL

Re: Slot together project

Postby Adrian » Fri Dec 08, 2017 2:17 pm

Looks like the link didn't copy properly. I think it should be - http://support.vectric.com/tutorials/V8 ... her_1.html
User avatar
Adrian
Vectric Archimage
 
Posts: 7548
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re:Rocket video.

Postby cusoak » Fri Dec 08, 2017 3:41 pm

I have downloaded the Rocket sign video.
They are very good and you learn a lot.
But the volume on them is so low that you can just hear the person talking, I have found that to be the same with most of them.
If that could be turned up anyway that would be great. I have checked and all my settings are as loud as they can be.
Jeff
cusoak
 
Posts: 41
Joined: Mon Nov 06, 2017 1:57 pm
Model of CNC Machine: Shapeoko 3D XXL

Re: Slot together project

Postby Adrian » Fri Dec 08, 2017 4:14 pm

Which version are you watching? The V8 is a male voice and the V9 is a female voice.

Both seem fine to me with the volume on the video at full (where I always have it) and the Windows volume at 50%.
User avatar
Adrian
Vectric Archimage
 
Posts: 7548
Joined: Thu Nov 23, 2006 2:19 pm
Location: Surrey, UK
Model of CNC Machine: ShopBot PRS Alpha 96x48

Re: Slot together project

Postby cusoak » Fri Dec 08, 2017 4:58 pm

I think my problem is that I do not have the right media player.
I gave a copy to my wife and she tried it on her computer and the volume was very good.
So I will have to figure out what one I need to use.
Sorry Jeff
cusoak
 
Posts: 41
Joined: Mon Nov 06, 2017 1:57 pm
Model of CNC Machine: Shapeoko 3D XXL


Return to Cut2D - General

Who is online

Users browsing this forum: mtnc100 and 7 guests