shakira
-
- Vectric Apprentice
- Posts: 70
- Joined: Fri Jul 24, 2009 11:00 pm
- Model of CNC Machine: High Z-720
- Location: Guadalajara, Mexiko
-
- Vectric Craftsman
- Posts: 295
- Joined: Wed Jan 07, 2009 6:17 pm
- Model of CNC Machine: DIY
- Location: Granbury, Texas
Re: shakira
Nice job! Care to share your settings and bit?
Jim
Jim
-
- Vectric Apprentice
- Posts: 70
- Joined: Fri Jul 24, 2009 11:00 pm
- Model of CNC Machine: High Z-720
- Location: Guadalajara, Mexiko
Re: shakira
Shure Jim ... I used a 2mm ball nose bit, 15% overlap, 2mm max depth at 35mm/s.
I have been trying several finishes but not jet satisfied, this time the contrast was too high ...
Gerardo
I have been trying several finishes but not jet satisfied, this time the contrast was too high ...
Gerardo