Solid surface photo v carve

Gallery for images of work cut using PhotoVCarve

Solid surface photo v carve

Postby kevinl » Thu Feb 22, 2007 11:31 pm

I have had a couple peices of this stuff layin around awhile. Cant believe I havent tried this untill now. Very happy with the results!
kevinl
Vectric Craftsman
 
Posts: 144
Joined: Wed Jul 05, 2006 11:06 pm
Location: Michigan

Postby Tony Mac » Fri Feb 23, 2007 12:13 am

Hi Kevin,

Excellent work and a fantastic 'Permanent Picture'.

What size is the pcture and what cutter did you use?

Thanks,

Tony
User avatar
Tony Mac
Vectric Alumni
 
Posts: 1965
Joined: Sat Jul 30, 2005 6:24 pm
Location: UK

Postby kevinl » Fri Feb 23, 2007 2:55 am

Thanks Tony

The image is 6"x8" and I used a 60 degree engraving bit with a .01" tip from onsrud.
kevinl
Vectric Craftsman
 
Posts: 144
Joined: Wed Jul 05, 2006 11:06 pm
Location: Michigan

Postby Randy101 » Sat Feb 24, 2007 9:21 pm

Very nice job Kevin, may I ask what machine you are using? I'm looking to buy a machine, but want a beginner model first. Not a 10,000 machine, but one under 5 grand at least, I'm just a hobbyist. :D
Randy101
 
Posts: 1
Joined: Sat Feb 24, 2007 9:08 pm

Postby kevinl » Mon Feb 26, 2007 12:28 am

Welcome to the forum randy. Have you considered building your own machine? I believe Jay and a few others around here have built their own machines and they seem to be pretty happy with them. If you prefer to buy I think I would recomend taking a look at shopbot.
kevinl
Vectric Craftsman
 
Posts: 144
Joined: Wed Jul 05, 2006 11:06 pm
Location: Michigan


Return to PhotoVCarve - Gallery

Who is online

Users browsing this forum: No registered users and 3 guests