First large portrait Litho
-
- Vectric Wizard
- Posts: 970
- Joined: Tue Mar 20, 2007 6:29 am
- Model of CNC Machine: ShopBot prt with 4g upgrade
- Location: Visalia, Ca
First large portrait Litho
Here is my first large portrait. The picture itself is 9.75x7 or so. I cut it with a .125 ballnose 1 pass I had it cut max depth 0.23 worked great. It took around 2.5 - 3 hours. As is the norm the litho looks bettter in person .
- RoutnAbout
- Vectric Wizard
- Posts: 2085
- Joined: Mon Sep 19, 2005 11:09 pm
- Model of CNC Machine: 24x18 Desktop
- Location: North Manchester, Indiana
- RoutnAbout
- Vectric Wizard
- Posts: 2085
- Joined: Mon Sep 19, 2005 11:09 pm
- Model of CNC Machine: 24x18 Desktop
- Location: North Manchester, Indiana
-
- Vectric Apprentice
- Posts: 66
- Joined: Sat Sep 13, 2008 12:18 am
- Location: Downingtown, PA
- Contact:
- lovebugjunkie
- Vectric Wizard
- Posts: 351
- Joined: Tue Jul 10, 2007 1:12 am
- Model of CNC Machine: Romaxx HS1
- Location: USA
-
- Vectric Wizard
- Posts: 970
- Joined: Tue Mar 20, 2007 6:29 am
- Model of CNC Machine: ShopBot prt with 4g upgrade
- Location: Visalia, Ca
Thanks Rout the Pizza was Soooo goood ..... leaving some on my chin for later
LBJ , LM7 it is Bone Corian . The only white I have is .5 inch The .25 is so nice to work with no premilling required
Now that you mention it Nick, I don't think you can buy gum for a quarter... What would Bazoka Joe say ?
Thanks for looking guys
LBJ , LM7 it is Bone Corian . The only white I have is .5 inch The .25 is so nice to work with no premilling required
Now that you mention it Nick, I don't think you can buy gum for a quarter... What would Bazoka Joe say ?
Thanks for looking guys