Lithophane, first one :)

Gallery for images of work cut using PhotoVCarve

Lithophane, first one :)

Postby crocky » Fri Apr 11, 2008 10:22 am

Hi,

This one is a little rough and has not even been cleaned :) 6 mm chopping board, it has not been taken from the kitchen either!

For a first time attempt it is fairly good, now I have to play with speeds and feeds :)
Attachments
isaiah-1.jpg
isaiah
Cheers,
Bob
Aspire, VCarve Pro, PhotoVCarve
Blog: http://www.ocm.com.au/wordpress/
User avatar
crocky
Vectric Craftsman
 
Posts: 120
Joined: Sat Apr 14, 2007 6:56 am
Location: Hoppers Crossing, Vic, Aust

Postby Tony Mac » Fri Apr 11, 2008 10:35 am

Warning - Making lithophanes can be addictive and may result in family and friends being friendlier than usual :)

Have Fun Bob!

Tony
User avatar
Tony Mac
Vectric Alumni
 
Posts: 1965
Joined: Sat Jul 30, 2005 6:24 pm
Location: UK

Postby crocky » Fri Apr 11, 2008 11:14 am

Tony Mac wrote:Warning - Making lithophanes can be addictive and may result in family and friends being friendlier than usual :)

Have Fun Bob!

Tony


:) That is my grandson, and you are right - they are starting to be friendlier now :)
Cheers,
Bob
Aspire, VCarve Pro, PhotoVCarve
Blog: http://www.ocm.com.au/wordpress/
User avatar
crocky
Vectric Craftsman
 
Posts: 120
Joined: Sat Apr 14, 2007 6:56 am
Location: Hoppers Crossing, Vic, Aust

Postby Thkoutsidthebox » Fri Apr 11, 2008 6:08 pm

Very nice. :) I really have to try a Lithophane soon. :)
Last edited by Thkoutsidthebox on Sat Apr 12, 2008 1:10 am, edited 1 time in total.
User avatar
Thkoutsidthebox
Vectric Wizard
 
Posts: 1484
Joined: Wed Oct 25, 2006 3:19 pm
Location: Europe

Postby crocky » Sat Apr 12, 2008 12:23 am

That was the first cut with PhotoVCarve, so for a first it was pretty good considering the material that I used.

Got to mash the speeds a bit and have another go :)
Cheers,
Bob
Aspire, VCarve Pro, PhotoVCarve
Blog: http://www.ocm.com.au/wordpress/
User avatar
crocky
Vectric Craftsman
 
Posts: 120
Joined: Sat Apr 14, 2007 6:56 am
Location: Hoppers Crossing, Vic, Aust

Postby crocky » Sat May 03, 2008 1:44 am

Okay....

Here is the REAL Lithophane movie and it also shows what my set-up is :) and remember I have only one hand working :mrgreen:

http://www.youtube.com/watch?v=pIz4G9EwkL8

Produced from PhotoVCarve of course :)
Cheers,
Bob
Aspire, VCarve Pro, PhotoVCarve
Blog: http://www.ocm.com.au/wordpress/
User avatar
crocky
Vectric Craftsman
 
Posts: 120
Joined: Sat Apr 14, 2007 6:56 am
Location: Hoppers Crossing, Vic, Aust

Postby RoutnAbout » Sat May 03, 2008 4:40 am

Bob, the great job on the lithophane. Now you gotta get ready for those First Steps of the Big Star.

nice work
Roll of Honor <-- Never Forget
________
Don
User avatar
RoutnAbout
Vectric Wizard
 
Posts: 2077
Joined: Mon Sep 19, 2005 11:09 pm
Location: North Manchester, Indiana
Model of CNC Machine: Old Bot with a Rope Pull Start Spindle

Postby crocky » Sat May 03, 2008 8:42 am

Thanks Don :)

We have got little while yet :)
Cheers,
Bob
Aspire, VCarve Pro, PhotoVCarve
Blog: http://www.ocm.com.au/wordpress/
User avatar
crocky
Vectric Craftsman
 
Posts: 120
Joined: Sat Apr 14, 2007 6:56 am
Location: Hoppers Crossing, Vic, Aust


Return to PhotoVCarve - Gallery

Who is online

Users browsing this forum: No registered users and 1 guest